Diagtools X-431 TSGUN, User Manual

Page: 9 / 18

Compatible Product List
X-431 TSGUN can work with any one of the following diagnostic tools of
LAUNCH family:
PRO Series:
X-431 EURO PRO5 / X-431 EURO PRO4 / X-431 EURO TUR B O
EURO TAB Series:
X-431 EURO TA B III/X-431 EURO TAB II
*Note: Due to continuing improvement, more products will be covered to
support this feature. We reserve the right to make changes on the above !ist at
any time without prior notice.
Initial Use
1 Charging
1
Plug one end of the charging cable into the charging port of the X-431
TSGUN, and the other end to an external power adaptor (not included),
then connect the power adaptor to the AC outlet. While being charged,
the LED illuminates red. Once the LED changes into green, it indicates
the charging is complete.
I
Powering On/Off 1
©
Press the C) button for about 3 seconds to turn it on. A beep will sound
and the screen will light up.
Press the C) button for about 3 seconds to turn it off.
Basic Operations
JJ..l'f//f Switches to different tire positions.
OK
Press it for about 3 seconds to turn it on/off.
• Screen On: Press it once to enter hibernate mode.
• lf the device is not charged and there is no operation
made for 30 minutes, it will automatically power off.
• lf the device is charging and there is no operation
made for 5 minutes , it will automatically enter
hibernate mode to conserve battery power.
• Screen Off (hibernate): Press it once to wake it up.
Press it to confirm the current operation.
(c) Diagtools. Pernavas 43A, Riga, Latvia, LV-1009. Tel. +37129416069, +37167704152, www.diagtools.eu