Di-soric LAT 61, User Manual, Page: 34 / 87

Chapter 3 Function
3-3
3
ᴾ
Class Function Details
Initial value
Memory
change* Ref.
page
Judgment Output
Selection
Sets the operation of the output block.
㩷
Default: 2-state
{
3-22
Threshold a
Threshold b
Sets threshold a
and threshold b.
㩷
Default: +(detection range)
Default: -(detection range)
{
Displace
ment
Judgment
Hysteresis Sets the hysteresis.
Default: +(0.2% of setting range)
{
3-24
Judgment Output OFF
Delay Delays the timing of judgment output switched OFF
from ON.
Default: OFF
{
3-25
Out
put
Se
ttin
gs
Measurement Value
Display on Panel Turns OFF the rightmost digits on the digital display.
㩷
Default: SET 1
{
3-27
Analog Output
Selection
Selects the desired output type from current output and
voltage output.
Default: Current output
{
3-28
Meas A Default: Negative measurement range
{
Current A Default: +4.000 mA
{
Voltage a Default: 0.000 V
{
Meas B Default: Positive measurement range
{
Current B Default: +20.000 mA
{
Ana
log
S
etti
ngs
Analog
Scaling
Voltage b
Performs scaling
the analog current
output and the
analog voltage
output to any
desired value.
㩷
Default: 10.000 V
{
3-29
Analog Output at Alarm
Sets the analog output status at alarm operation.
Default: Holds previous value
{
3-31
Digital Output at Alarm
Sets the digital output status at alarm operation.
Default: Holds previous value
{
3-32
Alar
m
Se
ttin
gs
Alarm Delay Times
Holds the previous normal value up to the setting
number of times if an alarm is issued.
Default: 8 times
{
3-33
Timing Mode Sets the timing input mode. Default: Hold 3-39
Laser Control Switches laser emission/stop.
Default: Emission
3-40
Eco Mode
Turns OFF the LED indicators on the control panel for
energy saving while the system is in RUN mode.
Default: Eco OFF
3-41
View Version Displays the software version of the sensor. - 3-42
Initialization Initializes the memory settings currently in use.
¯
3-43
Save Saves all memory settings.
¯
3-44
Sys
te
m
S
etti
ng
s
Timing Holds the measurement value. Default: OFF
¯
3-45
㩷
* Memory change
{
: Up to four types of settings can be saved by performing memory
change.
¯
: Settings cannot be changed by performing memory change.
: Settings are saved as common settings for all memories. Settings cannot
be executed on a memory-to-memory basis.
㩷