DI Lusso OV604MS, Operating Manual

Page: 6 / 16


Secure the appliance to the cabinet frame using the screws provided. Insert it together with the plastic washers
into the 2 holes that can be seen in the frame of the oven when the door is open and cap it with the silicone
washes.

Ensure the oven in secured firmly in place as described above, and insulate electrical connections in order to
avoid contact with metallic parts. Adhesive joining of the cabinets such as laminates and its edgings has to be
able to withstand temperatures up to 120 ° C to avoid deformations or peeling.

Provide for ventilation (for tall cabinets through the back and top & base cabinets through the back and bottom)
to allow sufficient air intake and circulation around the oven, to avoid causing any damage to the furniture.

For the most efficient air circulation, the oven should be fitted according to the dimensions shown. The rear
panel of the cabinet must be removed as well so that air can circulate freely.

Do not switch on the appliance before it has been fully and correctly installed.
Before using the oven for the first time, we suggest to:

Remove the protective film covering the oven door glass (if any)

Remove all removable accessories, trays & racks and wash them with dishwashing detergent and dry.

Heat the empty oven at max. temperature for 45 minutes. This is to remove any unpleasant smell caused by
working residues. It may also emit some smoke, which is normal and will stop after awhile.

Let the oven cool down and clean the internal cavity of the oven with soapy water and wipe it dry.
IMPORTANT !
TAKE NOTE OF THE ‘WARNING HOT SURFACE’ SIGN.
WHEN THE OVEN IS IN OPERATION, THE OVEN DOOR MAY BECOME HOT TO TOUCH. TO PREVENT INJURY OR
BURNS TAKE CARE WHEN USING IT.
IMPORTANT!
MAKE SURE CHILDREN DO NOT GO NEAR THE OVEN WHEN IN USE
.
Page
4
Version 01