Operation
Warning:
RISK OF ELECTROCUTION. HIGH-VOLTAGE CIRCUITS,
BOTH AC AND DC, ARE VERY DANGEROUS AND
SHOULD BE MEASURED WITH GREAT CARE.
1. ALWAYS turn the function switch to the OFF
position when the meter is not in use. This meter
has Auto OFF that automatically shuts the meter
OFF if 15 minutes elapse between uses.
2. If “OL” appears in the display during a
measurement, the value exceeds the range you
have selected. Change to a higher range.
Note:
On some low AC and DC voltage ranges, with the
test leads not connected to a device, the display
may show a random, changing reading. This is
normal and is caused by the high-input sensitivity.
The reading will stabilize and give a proper
measurement when connected to a circuit.
