DHS Fitness HIPERFLEX 004, Owner'S Manual

Page: 10 / 16

- 9 -
WARNING, Safety & Maintenance
Be sure that all users carefully read and
understand all warning, safety and maintenance
info on this Owner’s Manual or labels on the
machine before each use. Failure to do so may
result in death or serious injury.
It is imperative that you retain this Owner’s
Manual and be sure all warning labels are legible
and intact.
If you have any questions about the operation,
set up or maintenance of this machine please
contact the local distributors or sales agents.
THERE IS A RISK ASSUMED BY INDIVIDUALS
WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE
RULES:
1. Inspect equipment before each workout. Check that
all nuts, bolts, screws and pop pins are in place and fully
tightened. Also, before use, check cables for signs of
wear. Replace all worn parts immediately. Never use
machine if any parts are damaged or missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN
SERIOUS INJURY.
2. Keep clear of the cables and all moving parts when
the machine is in use.
3. Always make sure all Snap Links are closed when
doing any cable/pulley/strap exercises.
4. Exercise with care. Perform your exercises at a
smooth moderate pace; never perform jerky or
uncoordinated movements that may cause injury.
5. It is recommended that you should workout with a
training partner.
6. Do not allow children or minors to play on or around
this equipment.
7. If unsure of proper use of equipment, call your local
distributor or agent.
8. WARNING: Consult your physician before starting
your exercise program. For your own safety, do not
begin any exercise program without proper instruction.
WARNING
Safety and Maintenance of Cables
IMPORTANT: Cables are wear items. It is your responsibility to prevent unexpected breakage.
Cable inspection should be performed daily. Inspect all cables, the nylon coating on all cables, and
the area near the fitting at each end of each cable.
Replace any damaged or worn cable immediately. Do not allow the machine to be used until
damaged or worn cables are replaced. Using or allowing a machine to be used with a suspect cable
can result in serious injury. See Owner’s Manual for more information.
MAINTENANCE
SCHEDULE
Check the function and integrity of
the following components.
As noted, inspect equipment before
each workout. Replace all damaged,
broken
or worn components
immediately.
D
A
I
L
Y
W
E
E
K
L
Y
Cables:
Check tension, end
fittings, and coating
Check that locking
nut at weight stack is
tight
√
√
Upholstery:
Wipe down and dry
Clean and condition
√
√
Frame:
Wipe down and dry
Polish / Wax
√
√
Chrome:
Wipe down and dry
Polish / Lubricate
√
√
Nuts/ Bolts/ Fasteners: Tighten
and/ or adjust as needed
√
Guide
Rods:
Lubricate and clean
√
Linear
Rods:
Lubricate and clean
√
Seat
Sleeves:
Lubricate and clean
√
Adjustments/ Locking Pins/
Tightening Knobs
√
Weight Stack Pins
√
Warning Instruction Labels
√
Springs/ Pop Pins
√
Anti Skid Surfaces
√
Hand Grips/ Rollers
√