STEP 4
Connect the Extension
Wire (13) with the
Sensor Wire (11). After
making sure the wires are
well connected, then fix
the Handlebar Post (17)
to the post of Main
Frame (1) with the Inner
Hex Bolts (14) and Arc
Washers (6).
STEP 5
5.
Attach the Computer Bracket (40) to the Handlebar Post (17) tightly with
Cross Pan Head Screws (38). Then attach the Computer (26) to the
Computer Bracket (40) tightly with Cross Pan Head Screws (23), and
connect the Extension Wire (13) and the wire of Computer (26). After
making sure the wires are well connected, then use the end cap for the
line(41)to put the two side of the line insert in the handlebar post(17).
6.
To install the Handlebar (25), remove the Desk (20) from the Handlebar
(25) by pressing the Clamping Sheet (19) down to open the clasp, as shown
in Figure B.
7.
Open the clamp G on the Handlebar Post (17). Place the Handlebar (25) in
clamp G, making sure pins E and F sit on metal bracket H. Close the clamp
and lock the Handlebar (25) to the Handlebar Post (17) with Knob (39),
Spacer (16) and Flat Washer (37).
8.
Attach the Desk (20) to the Handlebar (25) by pressing both Fixing Bracket
(18) and Clamping Sheet (19) together to close the clasp as picture C shows.
(Note: The Handlebar (25) should fit in the grooves on the bottom of the
Desk (20). Attach the Bottle Holder (24) to the Desk (20).
Summary of Contents for DHS8508
Page 3: ...DIAGRAM...
Page 11: ...EXPLODED DIAGRAM...
