44
DHOLLANDIA
17
QUALITY CONTROL AND PDI
•
Finish the liftgate in accordance with local regulations.
•
Execute all functions min. 5 times to ensure the liftgate functions correctly. In particular:
1
Verify that platform in work position aligns flush with vehicle floor.
2
Verify that platforms folds correctly into stow position.
•
Make sure that the platform will be clearly visible in public traffic:
1
Apply the RD/WH visibility tape on both sides of the platform.
2
Install the platform flags to the underside of the platform point.
3
If applicable, connect the flashing platform lights and verify their function.
•
If the operator is allowed to travel up and down on the platform by other means than original foot controls, the installer must mark
a safe-work zone of 16 x
16” (40
0 mm) at a safe distance of
10” (
250 mm) removed from the hazardous crushing area between
the inboard edge of the platform and the rear sill of the vehicle body.
•
Work through the CHECKLIST FOR THE PRE-DELIVERY-
INSPECTION (PDI) TEST. See Appendix 19.7 on page 55.
•
Complete the practical tests indicated therein.
