61
English
Appendices
2. Setting:
(1) Set up projectors and then setting the overlap size according
to the actual projections
A. Be sure the overlap size for setting is smaller than the
overlap size of actual projection.
B. Take advantage of warping IR on/off hot key to avoid IR
interference.
C. Turn on the Blend Setting menu for all the projectors helps
determine the effective overlap range.
Take projector setting layout 1x2 for an example and follow the
steps below,
(2) Adjust the overlap size of right boundary of left projector first.
A. The left side of overlap area will shift along with the values
of blending setting.
Overlap area is showed by a square with light color.
B. Adjust overlap size until the left side of overlap area of left
projector is not exceed the left boundary of right projector.