DHK Hobby Maximus GP 9382, User Instruction Manual

Page: 27 / 34

Frequency range
2.4GHz modulation
Sensitivity
Working voltage
Working current
Size
Weight
: 2.4GHz
: AFHDS
: -100dbm
: DC4.8-6.0V
: 5.7*26*15.2mm
: 11.2g
Receiver Functions
1. Antenna: Pull out the antenna completely
2. Connecting ports: receiver power port and channel signal connecting ports
> ST/1: Channel 1, steering signal port
> TH/2: Channel 2, throttle servo or ESC signal port
> AUX/3: Auxiliary signal port
> BATT/4: Receiver power port, can be auxiliary signal port
3. Set keys & LED indicators
>Bind setup.
Switch on the receiver, indicators flash slowly, press the setup key for 2 seconds
and release it, LED indicator flash in faster motion, binding starts. When the LED indicator is
on in stable status, the binding is complete. Note: To bind it quickly and effectively, please put
the receiver 40-50cm away from the transmitter.
>Failsafe. Switch on the transmitter and receiver, then you can see the LED indicator on
receiver is on. Adjust the throttle servo or ESC to brake or stop status, and keep it that way.
Press the setup key, then receiver LED indicator flashes, keep this for 3 seconds. After this,
release the setup key. Failsafe setup is complete.
>Disabling failsafe function. Switch on transmitter and receiver, once the signal is
connected, LED indicator is on. Press the setup key for 2 seconds, LED indicator flashes
quickly, at this point, keep pressing the setup key without release, press it for 2 more seconds,
LED indicator flashes slowly. Release the setup key, LED indicator is on. The setup is
complete.