DGTEC iWOOD 7, User Manual

Page: 16 / 21

TIME SETUP
LED
LED
LED
LED
11
1. Press the ALARM SET button on the remote control.
TIME will be displayed. Press the ENTER button.
2. The hour digits will flash. Press the / buttons to adjust
the hour. Press ENTER to lock the hour digits in.
3. Next the minutes digits will flash. Press the / buttons to
adjust the minutes. Press ENTER to lock the digits in.
Please note that this clock is a 24 hour clock.
Touch +/- on the front panel of the unit or press the / on
remote control to adjust the minutes
.
time
OPERATION
SLEEP
Press the SLEEP button on the remote control.
Use the and to increase/decrease sleep interval minutes.
Each interval is worth 5 minutes.Below is a flow chart showing
the maximum sleep time.
Unit will then automatically turn itself off once the sleep time
has expired.
SL 00 05 10 15 20 25 30 40 50 60
90 80 70
LED
MEM
To store a radio channel in memory, press the MEM button.
"CH00" will appear in the display window. Using the CH-/CH+
buttons select the channel position of choice (e.g CH12).
Press the ENTER button to confirm selection. Please note
that there are 30 MEMORY channel positions for storage.
Press MEM button for 3 seconds to go to auto search and
store mode.
Sl05