background image

7

Figure 11. Subtitle Setting Page

3.10  Teletext Subtitle

Display subtitle by teletext, the style of the teletext subtitle may be 
different by content provider. 

 

Figure 12. Digest

 

3.9  Subtitle

Display the subtitle on screen, the style of subtitle may be different by 
content provider. See Figure 11.
Press <Subtitle> button to display subtitle setting page.
Press <Up/Down> button to select subtitle language, if the program has 
subtitle.
Press <OK/Exit> button to exit subtitle setting page.

3.11   Guide

Press <GUIDE> button at normal play state, see section 

2.3.2

 for details.

3.12   Auto Sleep

Press <RED> button for the auto sleep function at normal play state, 12, 30, 
60, 120 minutes and OFF can be selected.

3.13   List

Press <GREEN> button at normal play state, see section 

2.3.1

 for details.

3.14   Digest

Press <YELLOW>

 

button at normal play state, digest can display 9 

programs on screen each time. But only the selected program is 
playing, others will display a snapshot. See Figure 12.
Press <YELLOW> button to display digest.
Press <Up/Down/Left/Right> button to browse program.
Press <OK> button to switch program and watch it.
Press <Exit> button to return normal play mode.

Press <Text/Subtitle> button to display teletext or subtitle setting page.
Press <Left/Right> button to select 

TTX Subtitle

.

Press <Up/Down> button to select teletext subtitle language.
Press <OK/Exit> button to exit the setting page.

3.15  Message

There are some messages to inform user the current status of the STB.

3.15.1  No Signal

STB can't get signal, for example, cable is disconnected.

3.15.2  No Service

Program doesn't have any content to play.

3.15.3  Service Scrambled

Program is scrambled for payment, you need contact with the content 
provider to know how to descramble it. 

3.15.4  Antenna Overload

Power supplied to antenna is overloaded

 

3.15.5  HDTV Not Support

If the program content is HDTV format, this STB doesn't support it. 

3.15.6  Channel Locked

Program is locked by setting lock (see section 

2.3.1.2

) and turning on 

channel lock in password setting (see section 

2.2.3.2

). User must input 

correct password to watch program. 

SUBTITLE

Subtitle Language

eng

OFF

Summary of Contents for DG-SD3401












Reviews: