DGTEC DG-1008i, User Manual

Page: 29 / 39

29
Other Functions
Setting the Clock
When the AC power is connected, “
12:00
” will
appear on the display. The clock can only be set
while the unit is off.
1. Press the
CLOCK / ADJ.
button on remote
control, the display will show “
Set hour”
.
2. Press
the or button to adjust the hour
format in (12 or 24HR) .
3. Press the
ENTER
button on remote control,
the minutes digits begin to fl ash. Press the
or button to adjust the minutes.
4. Press
the
ENTER
button to con fi rm. The day
selection begins to fl ash.
5. Press or
button to select Sun / Mon /
Tue / Wed / Thu / Fri / Sat.
6. Press the
ENTER
button to con fi rm.
Setting Alarm 1 or Alarm 2
The dual alarms are set in the following
sequence:
• Set Alarm
Set time Set mode
Set day
To enable or disable the alarm:
1. Press the
ALARM 1
or
ALARM 2
button to
enter the alarm setting sequence.
2. Press
the
ENTER
button when you see “
Set
Alarm
”.
3. Press
the or button to select alarm on
or off and then press the
ENTER
button to
con fi rm.
To set the alarm time:
4. Press the
ENTER
button when you see “
Set
time
”.
5. Press
the or button to set the hour
and then press the
ENTER
button.
6. Press
the or button to set the minute
and then press the
ENTER
button.