Installing the Driver and the Software
IMPORTANT
Make sure to connect the machine to the computer by following the given procedure. Failure to follow the
correct procedure may make installation impossible.
Procedure
A
Before you start installation and setup, make sure the USB cable is NOT connected.
B
Log on to Windows as an administrator or as a member of the Administrators group.
C
Insert the DGSHAPE Software Package CD into the computer.
When the automatic playback window appears, click [Run menu.exe]. If the [User Account Control]
window appears, click [Allow] or [Yes]. The install menu appears automatically.
D
Click [Install].
The drivers and software that will be installed will be displayed.
E
Click [OK].
METAZA Driver 2 and each software will be installed all at once.
"
P.23 "The Software You Can Install and Set Up"
You can install METAZA Driver 2 and each software separately.
"
P.126 "Installing the Driver Separately", P.129 "To Install Software Separately"
1
Getting
Started
Installing the Software
24
