Installing the Software
System Requirements
Operating system (OS)
*
Windows 10, 8.1, 7 (32-bit and 64-bit versions)
Processor
Intel® Core 2 Duo or greater (Core i5 or greater recommended)
Memory
1 GB or greater (2 GB or more recommended)
Optical drive
CD-ROM drive
Video card and monitor
At least 16 bit colors (High Color) with a resolution of 1024 × 768 or
more recommended
Free hard-disk space
required for installation
25 MB
* As this software is a 32-bit application, it runs on WOW64 (or Windows-On-Windows 64) under the
64-bit version of Windows.
For the latest information, see the DGSHAPE Corporation website (http://www.dgshape.com/).
The Software You Can Install and Set Up
METAZAStudio
This is a program for creating imprint data. It enables you import and crop
images to imprint, and perform editing to add text, boxes, and the like.
SFEdit2
This program lets you create and edit stroke fonts. Stroke fonts are line
drawings created by automatically extracting the center lines from a
TrueType font. You can use the generated stroke fonts as fonts with
METAZAStudio.
MPX-95 Head Manager
This is a utility for adjusting the head. Run it when you replace the head
or adjust the marking pin.
Dr. Engrave
This is text and image imprinting software that lets you create imprint
data. You can use TrueType fonts registered in Windows. It also has stroke
characters.
METAZA Driver 2
This Windows driver is required for sending data from a computer to
the machine.
1
Getting
Started
23
