● Read all of these instructions and save them for later use.
● Follow all warnings and instructions on the product.
● Product
◆ Do not cover block the vent holes in the case.
◆ Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots.
They may cause accident fire, electric shock or failure.
◆ Disconnect the power plug from the AC outlet if you will not use it for an indefinite period
of time.
◆ Do not attempt to service this product yourself , as opening or removing covers may
expose you to dangerous voltage points or other risks.
◆ Do not touch the screen directly with your fingers. You may damage the screen, and oil
from your.
Precautions
◇
Skin in difficult to move.
◆ Do not apply pressure to screem. The LCD is very delicate.
● Power
◆ Use the type of power indicated on the marking label.
● Plugs
◆ Do not remove any of the prongs of the monitor's three-pronged power plug.
◆ Disconnect the power plug from the AC outlet under following conditions:
▲ If you will not use it for an indefinite period time.
▲ When the power cord or plug is damanged of frayed.
▲ If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions . Improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
▲ If the product has been dropped or the cabinet has been damaged.
▲ If the product exhibits a distinct change in performance, indicating a need for service.
● Power and extension cords
◆ Do not allow anything to rest on the power cord.
◆ Do not locate this product where persons will walk on the cord.
◆ Use the proper power cord with correct attachment plug type. If the power source is
120V AC, use a power cord that has UL and C-UL approvals . If the power source is a
240V AC supply, use the tandem ( T blade ) type attachment plug with ground conductor
power cord that meets the respective European countyr's safety regulations, such as
VDE for Germany.
◆ Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does't exceed 10 amperes.
◆ Ensure that the total ampere ratings on all units plugged into the extension cord is not
above the cord's rating.
◆ If the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TUV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A (minimum).
● Environment
◆ Place the monitor on a flat and leveled surface.
◆ Place the monitor in a will-ventilated place.
◆ Keep the monitor away from:
Overly hot, cold or humid places, places directly under sunlight, dusty surroundings,
equipment that generate strong magnetic fields.
.
5
