background image

DGM Lighting products 

 

built-in programs.   
Press Enter button, the last two digits in the display will show 00-12. This is the speed or different 
built-in programs. 
The first two digits in the display will not change.   
 
Press Up or    Down button to select.   
Press Enter button to save or press Menu button to exit. 
 

Music operation 

 

 

 
Press the Menu button.   
Press the Up or Down button until it shows one of the following: 
 
- SOUF: means sound-active effect (mode 1). 
- SOUD: means sound-active effect (mode 2). 
 
Press Enter button. Press Up or Down button to select one of them.   
Press Enter button to save (the device will be operated by the music signal received by the built-in 
micro-phone) or press Menu button to exit. 
 

Manual operation 

 

 

 
Press the Menu button.   
Press Up/Down button until it shows C1-C3 in the display. C1, C2, C3 means Red, Green and Blue 
color respectively. 
Press Enter button. 
Press Up or Down button to select C1, C2, or C3.   
Press  the  Enter  button,  the  last  2  digits  in  the  display  will  show  00-12. This  is  the  level  of  the 

Summary of Contents for Kameleon 36X3W















Reviews: