DGA Mach 2™ Permanent Disc Golf Basket
Assembly Instructions
Box includes: 1 base, 1 trapper basket, 1 chain holder, 1 long pole with cap, 1 swedged short pole,
3 long bolts (11mm), 3 locking nuts (11mm), 3 short bolts (10mm) and 1 focal point sticker.
You will need 10mm and 11mm wrenches or ratchets to tighten the bolts.
1) Remove all parts from inside the box. Place the base on level ground and insert the short pole into the base with the
swedged end facing up. Line up the poles three bottom bolt holes with the three bolt holes on the base. Push a long
bolt through both the base and pole bolt holes and tighten with a locking nut.
2) Place the longer pole with the cap side up onto the short pole’s swedged end and line up the three bolt holes on
both poles. Lift the trapper basket up onto the top of the pole. Slide the trapper basket down past the middle of the
pole and line up the three trapper basket bolt holes with the holes on the poles. Push a long bolt through the trapper
basket and the pole’s bolt holes. Tighten the long bolt with a locking nut.
3) Lift the chain holder up onto the top of the pole by first feeding the two 4 inch rings that connect to the bottom of
the chain strands. Line up the three bolt holes on the chain holder and the poles top three bolt holes and push a long
bolt through the chain holder and pole bolt holes. Tighten the long bolt with a locking nut.
4) The base, trapper basket and chain holder each have one remaining hole for the 10mm short bolts. In each of the
remaining holes insert and tighten a short bolt to prevent the base, trapper basket and chain holder from wobbling on
the pole.
5) Attach the included focal point sticker so that the top of the sticker is about five inches from the top of the pole.
Start with lining up one end of the sticker so it is straight up and down in line with the pole and slowly wrap the focal
point sticker around the pole. The Mach Lite logo should be facing side ways on the pole.
Base
Trapper Basket
Chain Holder
Short Pole
Swedged
End
Long Pole
with Cap
at Top
Long Bolt
Locking
Nut
Long bolt
Locking
Nut
Long Bolt
Locking
Nut
4 Inch
Rings
Short Bolt
Short Bolt
Focal Point
Sticker
Short Bolt
Step 1
Step 2
Step 3
Step 4
Step 5
DGA | The Founding Company of Disc Golf
DiscGolf.com 831-722-6037
