dg_toe10gip_cpu_instruction_xilinx_en.doc
23-Aug-19
Page 2
1 Overview
The demo is designed to run TOE10G IP for transferring 10 Gb Ethernet data by using TCP/IP
protocol. Two test environments can be setup for the demo, as shown in Figure 1-1. First one
(Test Env#A) uses one FPGA board transferring data with Test PC. More details to run the demo
by using FPGA and Test PC are described in PartA. Second one (Test Env#B) uses two FPGA
boards to transfer data from the 1
st
FPGA to the 2
nd
FPGA. More details to run the demo by using
two FPGAs are described in PartB.
User interface for setting the test parameters on FPGA and monitoring the hardware status is
Serial console by using UART interface.
Figure 1-1 Two test environments for the demo
