DG SATA-IP, Instruction, Page: 6 / 10

dg_sata_ip_dev_demo_instruction_at7_en.doc
17-Jun-21 Page 6
3 Operation Test on OS
1. Open Device Manager on Windows10 OS. New SATA Device disk (DG SATA Device) is
detected under
“Disk drives”. If new disk is not auto-detected, open device manager and
then select
“Scan for hardware changes” under Disk drives icon to re-start new disk
detection.
Note: If the SATA device is connected as hot-plug (run after Windows OS boot-up
completely), the M/B must be configured to support hot-plug detection on SATA
connection. Otherwise, the user needs to reboot the PC
to detect the new disk.
Figure 3-1 New disk detected on WindowsOS
2. Generally, the pop-up menu to initialize disk is displayed. Click
“OK” button to confirm new
disk initialization, as shown in the right window of Figure 3-2.
Note: If no pop-up menu is displayed, select Computer Management -> Disk Management.
The new disk which is unallocated is displayed. Select the new disk and select Initialize
Disk menu, as shown in the left window of
Figure 3-2.
If new disk which is unallocated is not displayed, please close and re-open Disk
Management.
Figure 3-2 Initialize Disk