DG Flugzeugbau LS8-st, Maintenance Manual, Page: 7 / 17

Maintenance Manual LS8-st
Systems
Edition: June 2016 Rev. 6 TN 8024 1-10
1. S
YSTEM
D
ESCRIPTION AND
A
DJUSTMENT
D
ATA
(continued)
1.4 Elevator Control System
(continued)
1.4.2 Deflections and Tolerances
Elevator: up 28° - 30°
down 22° - 26°
For easier checking, measured angles may be converted to mm / in
deflection values, using the actual local radius of the defined measuring
place. See also table below.
Limit values for elevator deflections in Millimetres/Inches
local radius 22°to 26° 28°to 30°
down up
mm in mm in mm in
67 2.638 26 to 30 1.024 to 1.181 32 to 35 1.260 to 1.378
68 2.677 26 to 31 1.024 to 1.220 33 to 35 1.299 to 1.378
69 2.717 26 to 31 1.024 to 1.220 33 to 36 1.299 to 1.417
70 2.756 27 to 31 1.063 to 1.220 34 to 36 1.339 to 1.417
71 2.795 27 to 32 1.063 to 1.260 34 to 37 1.339 to 1.457
72 2.835 27 to 32 1.063 to 1.260 35 to 37 1.378 to 1.457
1.4.3 Stops
Elevator stops at lower control stick end. Adjustment by use of two
10
◦ mm open end wrenches.
1.4.4 Elevator Rear Edge Play
Play should be measured with control stick fixed to neutral position.
Elevator : maximum 2.5 mm <0.1 in> at inner edge