DFSK K 2019 Series, Service Manual

Page: 76 / 124

Check/Maintenance Service
56
①
Pull switch to ON.
②
Take out the lift controller, press
UP button, the hydraulic pressure
motor and buzzer beging working,
people apart from cargo box.
When trun over to some angle,
tightwire pull the switch to limit
the location, then hydranlic
pressure power off, cargo box stop
turn over.
31 .Trurning Over and Side
①
Stop the car on flat floor.
Note the height of room when turn
over to behind, and insert the ring of
limited location, then put double bolt
into double groove hole, with bolt ring
of limited location, and check
equipment correct or not.
①
Open lift switch to ON
①
Take out the controller from cabin.
Press UP botton, and keep the normal
speed. When trun over to some angle,
tightwire pull the switch to limit the
location, then hydranlic pressure
power off, cargo box stop turn over.
When the lifting stop fails, the
hydraulic cylinder’s max range is
going to limite the angle of box
turn-over.
Left turn
①
Put single bolt into left single
蜂鸣器开关