14. 3. 2016
GPS/GPRS/GSM Module V3.0 (SKU:TEL0051) Robot Wiki
http://www.dfrobot.com/wiki/index.php/GPS/GPRS/GSM_Module_V3.0_(SKU:TEL0051)
5/20
After several seconds,the receiver will get a message from this shield
Ways to send Ctrl +Z in Coolterm
1. After typing the message text, press enter key, it will show:
'Enter' after text finished
Then, in the input area, pressing Ctrl+Z(note this key shortcut depends on your version and
configuration) will send out the single CTRL character successfully as below:
After press Ctrl+Z
2. Ctrl characters can also be sent out in their hexadecimal format ( this avoids problems with
Coolterm version and configurations, this method can be used with other Serial software), in which
hexadeciman '1A' is the value of Ctrl+Z:
