Specification
Supply voltage:<=12V
Compatible Uno
，
Mega
，
Romeo......
Compatible with 12V RGB LED Strip
Maximum power is 72W
（
2A per way
）
Support IR remote control
Pin Out
Arduino Driving Pins:
D9 -> PWM1 (Blue Output control)
D10 -> PWM2 (Red Output control)
D11 -> PWM3 (Green Output control)
IR Recieving Pin:
D4 -> IR data receiving
PS: This feature could be disable by removing the jumper cap on the shield.
Note:
1. Commonly we use the common anode RGB LED Strip. So when connecting the RGB Strip to the
driver shield, it requires a independent 12v power source for the high power LED strip.
2. The maximum powering current from this shield is about 9A totally(3A for each way). So it could
almost directly drive a 10 meter RGB LED strip.
Downloaded from
Downloaded from
