Wireless Programming
Bluno 2 wireless programming is completely compatible with Bluno1 (BLE4.0). And it is only
available under P2P connection mode: the host (the central device) to the slave side.
Similar to P2P connection, set one as host and plug to the PC; set the other one as slave.
Pairing the host and the slave, download is available.
Firmware Upgrade
DFRobot BLE4.1 has the firmware method to BLE 4.0, click to download
BLE4.1 firmware
update tool
, BLE4.1 firmware address
Firmware Download
。
Fig1: Bluno2 Firmware Update Tool
Update steps are as below:
Hold BOOT
Connect BLE4.1 to PC and loose BOOT, CHG and LINK flashes alternatively.
Open Bluno2 Firmware and select corresponding serial number.
Choose firmware to update, the firmware format is .img
Click to download
