INTIMIDATOR
XD 4
FOR ALL TECHNICAL QUESTIONS, PLEASE CALL
DFK AMERICA INC.
(630) 324-8585
83
Run the harness branch No.: 5 from the harness to the UTV’s main electrification.
Find the original cable where is 12V+ after you turn on the main UTV’s switch.
Connect the harness cables, red to 12V+original electrification and black to UTV’s skelet.
If you don’t find connection for connectors installed on harness branch, you can use other connectors
(included).
Connect hot water hoses with the UTV’s cooling circuit near the cooler by pair of “Y” coupling (included).
If you have detailed information about engine cooling circuite and you are sure about correct connection,
you can make that.
SEE NEXT PAGE
