manualshive.com logo in svg

DFI WL171, User Manual

Share
Download
DFI WL171 User Manual Download Page 46

46

User's Manual | 

WL171/WL173

Chapter 4

RAID

Step 4: Install the Intel Rapid Storage Technology Utility 

The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows 

RAID volume management (create, delete, migrate) from within the operating system. It will 

also display useful SATA device and RAID volume information. The user interface, tray icon 

service and monitor service allow you to monitor the current status of the RAID volume and/

or SATA drives. It enables enhanced performance and power management for the storage sub-

system. 

Step 3: Create a RAID Volume

1.  Go to the “Advanced” menu of the AMI BIOS and select “Intel(R) Rapid Storage Tech-

nology”.

2.  The screen displays all available drives. Select “Create RAID volume” to create a RAID 

volume”.

3.  Use the up or down arrow keys to select the RAID level and press <Enter>.

4.  Use the up or down arrow keys to scroll through the list of hard drives and press <En-

ter> to select the drive.

5.  Press <Enter>.

6.  Use the up or down arrow keys to select the strip size and press <Enter>.

7.  Enter the volume size and press <Enter>. 

8.  At the prompt, press <Y> to confirm volume creation.

Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit   

ESC: Exit

Security

Chipset

Boot

Save & Exit

Main

Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.

Advanced

X

 RC ACPI Settings  

X

 CPU Configuration

X

 Power & Performance

X

 PCH-FW Configuration

X

 Trusted Computing

X

 NCT6116D Super IO Configuration

X

 NCT6116D HW Monitor

X

 Serial Port Console Redirection

X

 USB Configuration

X

 Network Stack Configuration

X

 CSM Configuration

X 

Intel(R) Rapid Storage Technology

System ACPI Parameters.

ver.A1_DVT_10-1920_10-48

Summary of Contents for WL171















































Reviews:

No comments

Brands by name

Popular brands

Load more brands