DFI WL053 User Manual Download

Page: 37 / 38

User's Manual |

WL053

Chapter 3

BIOS SETTINGS

Boot

Setup Prompt Timeout

Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes

indefinite waiting.

Bootup NumLock State

Select the keyboard NumLock state: On or Off.

Quiet Boot

This section is used to enable or disable quiet boot option.

Boot Option Priorities

Rearrange the system boot order of available boot devices.

BGRT Logo

It is used to enable or disable to support display logo with ACPI BGRT table.

Note:

If “Boot option filter” of “CSM Configuration” is set to “UEFI and Legacy”

or “UEFI only” and “Quiet Boot” is set to enabled, “BGRT Logo” will show

up for configuration. Refer to the Advanced > CSM Configuration for more

information.

Save & Exit

Save Changes and Reset

To save the changes, select this field and then press <Enter>. A dialog box will appear. Select

Yes to reset the system after saving all changes made.

Discard Changes and Reset

To discard the changes, select this field and then press <Enter>. A dialog box will appear.

Select Yes to reset the system setup without saving any changes.

Restore Defaults

To restore and load the optimized default values, select this field and then press <Enter>. A

dialog box will appear. Select Yes to restore the default values of all the setup options.

Boot Override

Move the cursor to an available boot device and press Enter, and then the system will

immediately boot from the selected boot device. The Boot Override function will only be

effective for the current boot. The “Boot Option Priorities” configured in the Boot menu will not

be changed.

►

Save Setting to file

Select this option to save BIOS configuration settings to a USB flash device.

►

Restore Setting from file

This field will appear only when a USB flash device is detected. Select this field to restore

setting from the USB flash device.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Security

Chipset

Boot

Save & Exit

Main

Advanced

The number of seconds

that the firmware will wait

before booting the original

default boot selection.

Boot Configuration

Setup Prompt Timeout

Bootup NumLock State

Quiet Boot

Boot Option Priorities

BGRT Logo

Driver Option Priorities

[Off]

[Enabled]

[Disabled]

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Security

Chipset

Boot

Save & Exit

Main

Advanced

Save Options

Save Changes and Reset

Discard Changes and Reset

Restore Defaults

Boot Override

►

Save Setting to file

►

Restore Setting from file

Reset the system after

saving the changes

Summary of Contents for WL053







































Search results

Summary of Contents for WL053

Reviews:

Related manuals for WL053

Brands by name

Popular brands

DFI WL053, User Manual

Search results

Summary of Contents for WL053

Reviews:

Related manuals for WL053

Brands by name

Popular brands