www.dfi.com
11
Chapter 3 Installing the Device
Chapter 3
Chapter 3 - Installing the Device
Removing the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it ha
ve
been powered-off.
2. Disconnect all power cords and cables.
3. Remove the 2 chassis screws to open the top cover.
Installing the SATA Drive
1. Unfasten the 4 mounting screws that secure HDD bracket to the system.
Chassis
screw
4. The DIMM socket
s
are
readily accessible after removing the chassis cover.
DIMM socket
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD brackets and
then use the mounting screws to secure the drive in place.
SATA drive
Mounting screw
HDD bracket
Mounting screw
HDD bracket
DIMM socket
Chassis
screw