19
Chapter 2
HARDWARE INSTALLATION
User's Manual |
PR810-C622
1
DDR4_12(CPU1)
DDR4_11(CPU1)
DDR4_10(CPU1)
DDR4_4(CPU0)
DDR4_5(CPU0)
DDR4_6(CPU0)
DDR4_1(CPU0)
DDR4_2(CPU0)
DDR4 3(CPU0)
CPU1 Socket LGA3647
DDR4_7(CPU1)
DDR4_8(CPU1)
DDR4_9(CPU1)
PCIe 2
(x16)
PCIe 4
(x16)
PCIe 5
(x16)
PCIe 6
(x16)
PCIe 1
(x8)
PCIe 3
(x4)
PCIe 3-1
(x8)
ATX Power
CPU FAN2
+12V
Power
CPU0 Socket LGA3647
COM1
VGA
LAN1
USB2 1/2
USB3 1/2
LAN2
USB2 3/4
10G_LAN 1/2
1
10
2
12
Front Audio
LPC
1
USB2
USB2 7
10
USB2/3
5/6
SM BUS
HEADER
SATA7~1
BMC
Front
Panel
SYS-FAN
JP8
J10
3
J45
J32
1
JP16
JP15
M.2-M
1
1
J16
USB Ports
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals. The system board is equipped with mul-
tiple USB ports as listed below:
•
4 x USB 3.1 Gen 1 rear ports (USB 1/2/3/4)
•
2 x USB 3.1 Gen 1 internal ports, box headers (USB 5/6)
•
3 x USB 2.0 internal ports, one pin headers (USB 8/9) and one Type A (USB 7)
The internal USB ports may be mounted on a card-edge bracket. Install the card-edge bracket
to an available slot at the rear of the system chassis and then insert the USB port cables to a
connector.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
BIOS Setting
Configure the onboard USB in the "Advanced > USB Configuration" submenu of the BIOS.
USB 8/9 (USB 2.0)
USB 7 (USB 2.0)
Pin Assignment
Pin Assignment
1
V5USB4
2
V5USB4
3
USB2_HR_
USB1_
P8_R_N
4
USB2_HR_
USB2_
P9_R_N
5
USB2_HR_
USB1_
P8_R_P
6
USB2_HR_
USB2_
P9_R_P
7
GND
8
GND
9
---
10
N.C.
Pin Assignment
Pin Assignment
1
V5USB5
11
USB2_P6_R_P
2
USB3_P5_
RX_R_N
12
USB2_P6_R_N
3
USB3_P5_
RX_R_P
13
GND
4
GND
14
USB3_P6_
TX_C_R_P
5
USB3_P5_
TX_C_R_N
15
USB3_P6_
TX_C_R_N
6
USB3_P5_
TX_C_R_P
16
GND
7
GND
17
USB3_P6_
RX_R_P
8
USB2_P5_R_N
18
USB3_P6_
RX_R_N
9
USB2_P5_R_N
19
V5USB5
10
N.C.
20
---
USB 2.0 Box Headers
USB 3.1 Box Headers
Re
ea
r
r
I/
/O
P
o
o
r
t
ts
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support
≥
1.5A. For 3 or
more USB ports, the +5V_standby power source of your power supply must support
≥
2A.
1
2
10
9
1
4
1
10
11
USB 5/6 (USB 3.1)
USB 1/2/3/4 (USB 3.1)
