DFI PL610-C622 User Manual Download Page 46

Page: 46 / 54

www.dfi .com

Chapter 4 Supported Software

Chapter 4

Chapter 4 - Supported Software

Please download drivers, utilities and software applications required to enhance the perfor-

mance of the system board at https://www.dfi.com/DownloadCenter .

Intel Chipset Software Installation Utility

The Intel Chipset Software Installation Utility is used for updating Windows

INF files so that

the Intel chipset can be recognized and configured properly in the system.

To install the utility, download “PL610 Chipset Driver” zip file at our website.

1. Setup is ready to install the

utility. Click “Next”.

2. Read the license agreement

then click “Accept”.

3. Go through the readme

document for more installa-

tion tips then click “Install”.

5. After completing installa-

tion, click “Restart Now” to

exit setup.

Restarting the system will

allow the new software

installation to take effect.

4. The step displays the

installing status in the prog-

ress.

Summary of Contents for PL610-C622























































Search results

Summary of Contents for PL610-C622

Reviews:

Related manuals for PL610-C622

Brands by name

Popular brands

DFI PL610-C622, User Manual

Search results

Summary of Contents for PL610-C622

Reviews:

Related manuals for PL610-C622

Brands by name

Popular brands