46
3
Award BIOS Setup Utility
HDD Power Down
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of system
inactivity, the hard disk drive will be powered down while all other
devices remain active.
PCI/VGA Act-Monitor
Enabled
When the system enters the Suspend mode, it will check
the status of the VGA. If the VGA is active, it will not turn
the screen off. If the VGA is inactive, it will turn the screen
off.
Disabled
When the system enters the Suspend mode, it will
immediately turn the screen off without checking the
status of the VGA.
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec.
Regardless of whether the Power Management field is
enabled or disabled, if the power button is pushed
and released in less than 4 sec, the system enters the
Suspend mode. The purpose of this function is to
prevent the system from powering off in case you
accidentally hit or pushed the power button. Push
and release again in less than 4 sec to restore.
Pushing the power button for more than 4 seconds
will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
PWR Lost Resume State
Keep Off
When power returns after an AC power failure, you
must press the Power button to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
operating session where you left off before power
failure occurs will resume.
