65
3
Award BIOS Setup Utility
DDR 333MHz
The memor y clock speed will run at 333MHz.
DDR 400MHz
The memor y clock speed will run at 400MHz.
DRAM Timing
This field is used to select the timing of the DRAM.
Auto
The EEPROM on a DIMM has SPD (Serial
Presence Detect) data str ucture that stores
information about the module such as the memory
type, memory size, memory speed, etc. When this
option is selected, the system will run according to
the information in the EEPROM. This option is the
default setting because it provides the most stable
condition for the system.
Manual
If you want better performance for your system
other than the one by “Auto”, select “Manual” then
select the appropriate options in the “SDRAM
CAS Latency” to “Active to CMD (Trcd)” fields.
The system will run according to the settings in
these fields.
SDRAM CAS Latency
This field is used to select the clock cycles for the CAS latency.
Bank Interleave
The options are 2 Bank, 4 Bank and Disabled.
Precharge to Active (Trp)
The options are 2T and 3T.
Active to Precharge (Tras)
The options are 5T and 6T.
Active to CMD (Trcd)
The options are 2T and 3T.
DRAM Command Rate
The options are 1T Command and 2T Command.
