40
2
Hardware Installation
BIOS Setting
Con
fi
gure the onboard USB in the Advanced menu (“USB Con
fi
guration” sub-
menu) of the BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use the
USB device. Refer to your operating system’s manual or documentation for more
information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or
USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To
use this function:
• Jumper
Setting
JP4, JP5 and/or JP8 must be set to “2-3 On: 5V_standby”. Refer to “USB
Power Select” in this chapter for more information.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB
ports, the 5V_standby power source of your power supply must support
≥
1.5A. For 3 or more USB ports, the 5V_standby power source of your
power supply must support
≥
2A.
