74
3
BIOS Setup
WOL (PME#) From Soft-Off
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system. Access
to the LAN card will cause the system to wake up. Refer to the
card’s documentation for more information.
S5 Resume By USB
This field, when enabled, allows you to use a USB device to wake up
a system that is in the S5 state.
Power On By Alarm
Enabled
When Enabled, you can set the time you would like
the Soft Power Down (Soft-Off) PC to power-on in
the “Time (dd:hh:mm) of Alarm” field. However, if the
system is being accessed by incoming calls or the
network prior to the time set in the field, the system
will give priority to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default).
Day (of Month) Alarm
0
The system will power-on everyday according to the
time set in the “Time (hh:mm:ss) Alarm” field.
1-31
Select a date you would like the system to power-
on. The system will power-on on the set date, and
time set in the “Time (hh:mm:ss) Alarm” field.
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
HPET Support
This field is used to enable or disable HPET.
