25
2
Hardware Installation
3. Place the heat sink on
top of the CPU. Now
hook one side of the re-
tention clip onto the re-
tention module base by
fitting the hole(s) on the
retention clip into the re-
taining tab(s) of the re-
tention module base.
Hook the other side of
the retention clip so that
the hole(s) on the reten-
tion clip also fit into the
retaining tab(s) of the re-
tention module base.
Retention module base
2. The system board
comes with the retention
module base already in-
stalled.
Retaining
tab
Retention clip
Retaining tab
