8
User's Manual |
KS-KH
Chapter 1
Power button with LED (Green)
(1)
Press to power on or power off the system.
USB 2.0 Ports
Connect all devices with USB Type A ports and supports date rate according to USB 2.0 specification.
Reset button
Press to reset the system.
HDD LED (Red)
Indicates the status of storage devices (i.e. SATA and M.2) as below.
Status LED (Orange)
Indicates system status as below.
Status LED
ACPI States
Powered-On
Standby/Sleep
Hibernate/
Soft off
LED Behavior
Always ON
Blinks
Off
Extended power-on/power-off switch connector
Connects a distant power on/off switch.
COM Ports
All COM ports can be selected among RS232, RS422 and RS485 via jumper settings.
In addition, COM1 and COM2 can be selected between standard RS232 and RS232 with power via
jumper settings.
Getting to Know the KS-KH
Chapter 1
Bottom View
DC-in
DC 9~36V power input via a terminal block connector.
DVI-D (DV-I connector)
(2)
Connects the DVI-D connector of an LCD monitor.
HDMI (or DP++, optional)
(3)
Connects the HDMI connector of an LCD monitor.
USB 3.0 Ports
Connect all devices with USB Type A ports and support date rate according to USB 3.0
specification.
Gigabit LAN Ports
Connect the system to a local area network.
VGA Connector
Connects the VGA connector of a monitor.
HDD LED
HDD State
Disk access
activity
Disk drives present or not present
LED Behavior
Blink
Off
Notes:
1. Please gently press the power button to avoid possible damage.
2. This port can be in DVI or HDMI.
3. The HDMI is a DP/HDMI combo port but can only provide either HDMI or DP connectivity. Please
plug in a DP or an HDMI cable with the right orientation and alignment to avoid damage to the
connector. When inserting an HDMI cable, you should feel resistance (due to a pin on the right) if
the cable is not inserted correctly. For detailed instructions, please see a video at
.
Align this edge with the
left side of the connector
Angled-corner
(up)
Angled-corner
Aligning side
(left)
pin
Top View
DC-in
USB 3.0
DVI-D
(2)
(DVI-I connector)
LAN 1
LAN 2
VGA
HDMI
(3)
COM 2
Power Button
(1)
Reset Button
COM 3 COM 4
Status LED (Orange)
HDD LED (Red)
COM 1
Extended Power
on/off Switch
USB 2.0
