DFI KD600-H110/Q170 User Manual Download Page 48

Page: 48 / 80

www.dfi .com

Chapter 4 Supported Software

Chapter 4

Chapter 4 - Supported Software

Please download drivers, utilities and software applications required to enhance the perfor-

mance of the system board at https://www.dfi.com/DownloadCenter .

Intel Chipset Software Installation Utility

The Intel Chipset Software Installation Utility is used for updating Windows

INF files so that

the Intel chipset can be recognized and configured properly in the system.

To install the utility, download “KD600 Chipset Driver” zip file at our website.

1. Setup is ready to install the

utility. Click “Next”.

2. Read the license agreement

then click “Accept”.

3. Go through the readme

document for more installa-

tion tips then click “Install”.

5. After completing installa-

tion, click “Restart Now” to

exit setup.

Restarting the system will

allow the new software

installation to take effect.

4. The step displays the

installing status in the prog-

ress.

Summary of Contents for KD600-H110/Q170

















































































Search results

Summary of Contents for KD600-H110/Q170

Reviews:

Related manuals for KD600-H110/Q170

Brands by name

Popular brands

DFI KD600-H110/Q170, User Manual

Search results

Summary of Contents for KD600-H110/Q170

Reviews:

Related manuals for KD600-H110/Q170

Brands by name

Popular brands