- 12 -
Set the maximum alarm temperature (ex
：
alarm when temperature lower than
40 degree)
(1)
Add a new Environment Events, we named as ‘Limit’
(2)
Event Dead Time
Delay alarm for few seconds when event occur.
(3)
Event Sensor Type
Choose Thermal Radiometry.
(4)
Edit Measurement Area
To set the measurement area, please click the blank setting box first.
Open the live view page (don’t close the setting page).
Use shift + left-click on the thermal image, you will see the first set point.
Then release shift, left-click second point in the image.
Two point will be connected into a quad automatically.
After drawing the quad, press
，
system will update
the coordinate.