DFI HU968 User Manual Download Page 31

Page: 31 / 86

www.dfi .com

Chapter 4 BIOS Setup

Chapter 4

ACPI Settings

This section is used to configure ACPI settings.

ACPI Sleep State

Select the ACPI sleep state that the system will enter when the Suspend button is

pressed.

S3(STR) Enable the Suspend to RAM function.

Resume by PME

Enable this field to use the PME signal to wake up the system (via PCI, PCIE and

onboard LAN).

Resume by RTC Alarm

When Enabled, the system uses the RTC alarm to generate a wakeup event.

Select ACPI sleep state
the system will enter when
the SUSPEND button is
pressed.

ACPI Settings

ACPI Sleep State

Resume by PME
Resume by RTC Alarm

Advanced

[S3 only (Suspend to...)]

[Enabled]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Reset
ESC: Exit

Trusted Computing

This section configures settings relevant to Trusted Computing innovations.

Enables or Disables
BIOS support for security
device. O.S. will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.

Confi guration

Security Device Support

Current Status Information
SUPPORT TURNED OFF

Advanced

Security Device Support

Enables or Disables the BIOS support for the security device. O.S. will not show the

security device. TCG EFI protocol and TNT1A interface will not be available.

[Disable]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save Changes and
Reset
ESC: Exit

Confi guration

Security Device Support

TPM State

Pending operation

Current Status Information
  TPM Enabled Status:
  TPM Active Status:
  TPM Owner Status:

Advanced

[Enabled]

[Enabled]
[None]

[Enabled]
[Activated]
[Unowned]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save Changes and
Reset
ESC: Exit

Enables or Disables
BIOS support for security
device. O.S. will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.

Summary of Contents for HU968























































































Search results

Summary of Contents for HU968

Reviews:

DFI HU968, User Manual, Page: 31 / 86

Search results

Summary of Contents for HU968

Reviews: