www.dfi .com
39
Chapter 3 BIOS Setup
Chapter 3
Smart Fan Mode Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Smart Fan Mode Confi guration
CPU Fan Mode
CPU Fan Target Temp
CPU Fan Tolerance
Advanced
[Thermal CruiseTM Mode]
55
3
Smart Fan Mode Select
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save and Reset
ESC: Exit
CPU Fan Mode
Selects the CPU Fan Mode.
CPU Fan Target Temp
The CPU’s target temperature will vary according to the CPU Fan Mode.
CPU Fan Tolerance
The tolerance value of the CPU’s temperature will vary according to the CPU Fan
Mode.
NCT6102D Super IO Features
This section configures the support of some control functions.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
NCT6102D Super IO Features
Power-Loss State
Case Open Warning
WatchDog Count Mode
WatchDog Timeout Value
Advanced
[Aloways Off]
[Disabled]
[Second]
0
Control the status when
power loss occurs.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save and Reset
ESC: Exit
Power-Loss State
Controls the status when the power loss occurs.
Always Off
When power returns after an AC power failure, the system’s power is off. You
must
press the Power button to power-on the system.
Always On
When power returns after an AC power failure, the system will automatically power-on.
Keep Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is on
when AC power failure occurs, the system will power-on when power returns.
Cae Open Warning
Enables or disables case open warning function.
WatchDog Count Mode
Selects the watchdog count mode: second or minute.
WatchDog Timeout Value
Sets the timeout value of the super IO watchdog timer. 0 means disabled.