DFI HD100-H81 User Manual Download Page 6

Page: 6 / 79

Trusted Platform
Module - TPM*
(optional)

• Provides a Trusted PC for secure transactions

• Provides software license protection, enforcement and password protection

Rear Panel I/O
Ports

• 1 mini-DIN-6 PS/2 keyboard/mouse port

• 4 USB 2.0 ports

• 2 USB 3.0 ports

• 2 DB-9 RS232 serial ports

• 1 HDMI port

• 1 DVI-I port

• 2 RJ45 LAN ports

• Mic-in, Line-in and Line-out jacks

I/O Connectors

• 1 connector for 2 external USB 2.0/1.1 ports

• 1 LVDS LCD panel connector

• 1 LCD/inverter power connector

• 1 8-bit Digital I/O connector

• 1 Digital I/O power connector

• 1 front audio connector for line-out and mic-in jacks

• 1 S/PDIF connector

• 1 LPC connector* (optional)

• 2 SATA 3.0 ports

• 1 24-pin ATX power connector

• 1 4-pin 12V power connector

• 1 chassis intrusion connector

• 1 front panel connector

• 2 fan connectors

Energy Effi cient
Design

• Supports ErP Lot6 power saving* (optional)

• Supports ACPI

• System Power Management

• Wake-On-Events include:

- Wake-On-PS/2 KB/Mouse

- Wake-On-USB KB/Mouse

- Wake-On-LAN

- RTC timer to power-on the system

• CPU stopped clock control

• AC power failure recovery

Damage Free
Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors VCORE/5V/3.3V/V_DIMM/12V/5VSB voltages and failure alarm

• Monitors CPU/system fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan speed

• Watchdog timer function

BIOS

• AMI BIOS

- 64Mbit SPI BIOS

Power

Consumption

• TBD

Temperature

• Operating: 0

C to 60

• Storage: -20

C to 85

Chapter 1 - Introduction

Specifications

Processor

• LGA 1150 socket for:

- 4th Generation Intel

Core

processors

: Intel

Core

i7-4790S (8M Cache, up to 4.0 GHz); 65W

: Intel

Core

i7-4770S (8M Cache, up to 3.9 GHz); 65W

: Intel

Core

i7-4770TE (8M Cache, up to 3.3 GHz); 45W

: Intel

Core

i5-4590S (6M Cache, up to 3.7 GHz); 65W

: Intel

Core

i5-4590T (6M Cache, up to 3.0 GHz); 35W

: Intel

Core

i5-4570S (6M Cache, up to 3.6 GHz); 65W

: Intel

Core

i5-4570TE (4M Cache, up to 3.3 GHz); 35W

: Intel

Core

i3-4360 (4M Cache, 3.7 GHz); 54W

: Intel

Core

i3-4350T (4M Cache, 3.1 GHz); 35W

: Intel

Core

i3-4340TE (4M Cache, 2.6 GHz); 35W

: Intel

Core

i3-4330 (4M Cache, 3.5 GHz); 54W

: Intel

Core

i3-4330TE (4M Cache, 2.4 GHz); 35W

: Intel

Pentium

G3420 (3M Cache, 3.2 GHz); 53W

: Intel

Pentium

G3320TE (3M Cache, 2.3 GHz); 35W

: Intel

Celeron

G1820 (2M Cache, 2.7 GHz); 53W

: Intel

Celeron

G1820TE (2M Cache, 2.2 GHz); 35W

• 22nm process technology

Chipset

• Intel

H81 Express Chipset

Super I/O
Address

• NCT6102/4Eh

System Memory

• Two 204-pin DDR3 SODIMM sockets

• Supports DDR3 1333/1600MHz

• Supports dual channel memory interface

• Supports up to 16GB system memory

• DRAM device technologies: 1Gb, 2Gb and 4Gb DDR3 DRAM technologies are

supported for x8 and x16 devices, unbuffered, non-ECC

Expansion Slots

• 1 PCIe x16 Gen 3 slot (PCIe 3.0)

• 1 Mini PCIe slot

- Supports USB and PCIe signals

- Supports mSATA

- Supports full size Mini PCIe card

Graphics

• Intel

HD Graphics

• Display ports: 1 HDMI, 1 DVI-I, 1 LVDS

• HDMI: resolution up to 4096x2304 @ 24Hz or 2560x1600 @ 60Hz

• DVI-I, VGA: resolution up to 1920x1200 @ 60Hz

• LVDS: 24-bit, dual channel, resolution up to 1920x1200 @ 60Hz

• Supports 20 Graphics Execution Units (EUs)

• Intel

Clear Video Technology

• DirectX Video Acceleration (DXVA) support for accelerating video processing

Audio

• Realtek ALC886 5.1-channel High De

nition Audio

• S/PDIF audio interface

LAN

• Intel

I210 PCI Express Gigabit Ethernet controller

• Intel

I217 Gigabit Ethernet Phy

• Integrated 10/100/1000 transceiver

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Serial ATA

• 2 SATA 3.0 ports with data transfer rate up to 6Gb/s

• Integrated Advanced Host Controller Interface (AHCI) controller

Chapter 1

Chapter 1 Introduction

www.d

.com

Summary of Contents for HD100-H81
















































































Search results

Summary of Contents for HD100-H81

Reviews:

Related manuals for HD100-H81

Brands by name

Popular brands

DFI HD100-H81, User Manual

Search results

Summary of Contents for HD100-H81

Reviews:

Related manuals for HD100-H81

Brands by name

Popular brands