34
The G586VPM/C system board supports four PCI master/slave slots.
Each slot may be assigned INT A, B, C, D or Auto if the card installed
in the slot requires an interrupt. Each INT may then be assigned an
IRQ value.
Note
:
We recommend that you assign all slots to Auto.
Load BIOS Defaults
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the ROM chips. The BIOS
default values provide the slowest performance for the system but are
stable. You should use these values only if you are having hardware
problems.
Highlight this option on the main menu and press <Enter>. The mes-
sage below will appear.
Load BIOS Defaults (Y/N)? N
Type “Y” and press <Enter> to load the BIOS setup default values. Af-
ter pressing <Enter>, you will be returned to the main menu.
Load Setup Defaults
The Setup default values are stable and optimized for standard configu-
ration. These defaults must be selected as standard values for your
system.
