PCI/ISA System Board
3-9
u
Initial Setup Program
PCI Configuration Setup
Use the arrow keys to highlight “PCI Configuration
Setup” and press <Enter>, a screen similar to the one
below will appear.
The G586OPA system board supports four PCI slots.
Each slot may be assigned INT A, B, C, D if the card
installed in the slot requires an interrupt. Each INT may
then be assigned an IRQ value.
Most PCI cards can be installed successfully if you
configure the required PCI interrupt to INT A as shown
above. However, if you experience difficulty using the
standard setup, refer to the following examples. Ex-
amples 1-7 show how to match the interrupt on the PCI
adapter with BIOS.