34
Highlight this option on the main menu and press <Enter>. The mes-
sage below will appear.
Load Setup Defaults (Y/N)? N
Type <Y> and press <Enter> to load the Setup default values.
PnP Configuration Setup
Use the arrow keys to highlight “PnP Configuration Setup” and press
<Enter>. A screen similar to the one below will appear.
The default setting of the Resources Controlled By option is “Manual”.
This will allow you to set the IRQ you have assigned your add-in card to
Legacy ISA or PCI/ISA PnP (Plug and Play). For non-PnP ISA cards,
select Legacy ISA. For PnP ISA or PCI cards, select PCI/ISA PnP.
If the Resources Controlled By option is set to “Auto”, the system will
automatically detect the settings for you. IRQ 3 - IRQ 15 and DMA 0 -
DMA 7 options will not be shown in the PnP Configuration Setup
screen.
I/O Configuration Setup
Use the arrow keys to highlight “I/O Configuration Setup” and press
<Enter>. A screen similar to the one on the next page will appear.
