www.dfi .com
16
Chapter 3 Installing the Devices
Chapter 3
3. Grasping the Mini PCIe card by its edges, align the card into the slot at an approximately 30
degrees angle. Apply fi rm even pressure to each end of the card until it slips down into the
slot. The contact fi ngers on the edge of the card will almost completely disappear inside the
slot.
Mini PCIe card
4. Push the Mini PCIe card down until the clips at each end of the latch lock into position. You
will hear a distinctive “click”, indicating the card is correctly locked into position.
Clip
Clip
Installing the CPU
1. Make sure the system and all other peripheral devices connected to it have been powered-
off.
2. Disconnect all power cords and cables.
3.
Before installing the Intel CPU, remove the 8 mounting screws on the top side of the
system unit and then put them in a safe place for later use.
Mounting Screw