41
Chapter 3
BIOS SETTINGS
User's Manual |
EC500-CS
DHCP Mode
Select
Enabled
or
Disabled
then press Enter. Please make sure there is a DHCP server in the
network when this field is enabled.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
<Enabled>
Disabled
Enabled
[
↑↓
] =Move Highlight <Enter> =Complete Entry [Esc] =Discard Changes
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
WIRED LAN IPV4 CONFIGURATION
DHCP Mode <Disabled>
IPV4 Address
0.0.0.0
Subnet Mask Address 0.0.0.0
Default Gateway Address 0.0.0.0
Preferred DNS Address 0.0.0.0
Alternate DNS Address 0.0.0.0
<Enter> =Complete Entry [Esc] =Discard Changes
Subnet Mask Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Default Gateway Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Preferred DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
Alternate DNS Address
Insert a value from 0.0.0.0 to 255.255.255.255 in IPv4 format.
IPv4 Address
Assign a valid and available IP address to the system. Insert a value from 0.0.0.0 to
255.255.255.255 in IPv4 format.
IP address (e.g. 123.123.123.100)
0.0.0.0
Subnet mask (e.g. 255.255.255.0)
0.0.0.0
Default Gateway address
0.0.0.0
When DHCP is
Disabled
, please manually input a static route by configuring the fields as
shown below.
Preferred DNS address
0.0.0.0
Alternate DNS address
0.0.0.0
►
Network Setup
►
TCP/IP Settings
►
MEBX
►
Intel(R) AMT Configuration
