background image

www.dfi .com

91

Chapter 7 Intel AMT Settings

Chapter 7

45.   In the Intel(R) AMT Power Control menuselect Intel(R) AMT ON in Host Sleep 

States then press Enter. Select an option then press Enter.

Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372

Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.

INTEL (R) AMT POWER CONTROL

Desktop: ON in S0
Desktop: ON in S0, ME Wake in S3, S4-5 

46.   In the Intel(R) AMT Power Control menuselect Idle Timeout then press Enter. 

Enter the timeout value (1-65535).

Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372

Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.

INTEL (R) AMT POWER CONTROL

This confi gurations are effective only after AMT provisioning has started

Intel (R) AMT ON in Host Sleep States         

   <Desktop: ON in S0,

                                                                  ME Wake in S3, S4-5> 

 

Idle Timeout                                                

65535

                        <ENTER> = Complete Entry     [ESC]= Discard Changes

Timeout Value (1-65535)

This confi gurations are effective only after AMT provisioning has started

Intel (R) AMT ON in Host Sleep States         

    

<Desktop: ON in S0,

                                                                  ME Wake in S3, S4-5>  

Idle Timeout                                              

  65535

47.   Select Previous Menu until you return to the Main Menu. Select Exit then press Enter. 

Type Y then press Enter.

Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372

Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.

MAIN MENU

> Intel (R) ME General Settings
> Intel (R) AMT Confi guration

MEBx Exit

         Exit

[



] = Move Highlight     [Enter] = Select Entry           [Esc]= Exit

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

Summary of Contents for DL310-C226






































































































Reviews: