40
User's Manual |
CS181
Chapter 3
BIOS SETTINGS
NCT5525D HW Monitor
This section displays the system’s health information, i.e. voltage readings, CPU and system
temperatures.
X
Advanced
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Advanced
Smart Fan function setting
Pc Health Status
X
Smart Fan Function
System temperature
CPU temperature
CPU_Fan Speed
VBAT
VCORE
5V
3V3SB
3V3
: +37 oC
: +33 oC
: N/A
: +3.040 V
: +0.896 V
: +5.200 V
: +3.116 V
: +3.144 V
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Advanced
►
Smart Fan Function
Enable CPU SmartFan
Smart Fan Function
CPU Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
<Enable>
[30]
[40]
[50]
[60]
[35]
[60]
[80]
[100]
Smart Fan is a fan speed moderation strategy dependent on the current system temperature.
When the system temperature goes higher than the Boundary setting, the fan speed will be
turned up to the setting of the Fan Speed Count that bears the same index as the Boundary
field.
▼
CPU Smart Fan Control = [Enabled]
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the fan speeds accordingly, the value ranging
from 0-127℃. For example, when the system temperature reaches Boundary 1 setting, the
fan speed will be turned up to the designated speed of the Fan Speed Count 1 field.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will oper-
ate according to the specified boundary temperatures above-mentioned.
▼
SYS Smart Fan/CPU Smart Fan Control = [Disabled]
Fix Fan Speed Count
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will al-
ways operate at the specified speed regardless of gauged temperatures.
X
X
::::::
X
Advanced
X
NCT5525D HW Monitor
