DFI CD102 Series, User Manual

Page: 15 / 76

www.d fi .com
15
Chapter 2 Hardware Installation
Chapter 2
LVDS Panel Select
SW1 is used to select the resolution of LVDS panel on the system.
LVDS Panel Select Channel SW2
800x600 6/18 bit Single 1-4 On
1024x768 6/18 bit Single 2-4 On, 1 Off
1024x768
8/24 bit Single 1,3,4 On, 2 Off
1280x768
6/18 bit Single 3-4 On, 1-2 Off
1280x800
6/18 bit Single 1,2,4 On, 3 Off
1280x960
6/18 bit Single 2,4 On, 1,3 Off
1280x1024
8/24 bit Dual 1,4 On, 2,3 Off
1366x768
6/18 bit Single 4 On, 1-3 Off
1366x768
8/24 bit Single 1-3 On, 4 Off
1440x900
8/24 bit Dual 2-3 On, 1,4 Off
1400x1050
8/24 bit Dual 1,3 On, 2,4 Off
1600x900
8/24 bit Dual 3 On, 1,2,4 Off
1680x1050
8/24 bit Dual 1-2 On, 3-4 Off
1600x1200
8/24 bit Dual 2 On, 1,3,4 Off
1920x1080
8/24 bit Dual 1 On, 2-4 Off
1920x1200
8/24 bit Dual 1-4 Off
*1
*2
*3
*4
Note:
The default setting is eDP.
1. 1366x768: N2000 series processor supports eDP only.
2. 1600x1200: N2000 series processor supports DP only.
3. 1920x1080: D2000 series processor supports eDP only.
4. 1920x1200: D2000 series processor supports DP only.
SW1