50
3
Award BIOS Setup Utility
Memory Hole
This field is used to select the memory area that must not be
addressed to the ISA bus.
P2C/C2P Concurrency
When enabled, the PCI/AGP master to CPU cycle will be concurrent
whenever the Host CPU is performing R/W access to the PCI or
slave devices.
Fast R-W Turn Around
When enabled, the turn around time of a memory read followed by
a memory write is reduced.
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting, which
is 64M.
AGP Fast Write
This function is supported only if this field is set to Enabled.
OnChip USB
This field is used to enable or disable the onboard USB controller
supported by the chipset. If you are using a USB peripheral device,
make sure to set this field to Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this function.
OnChip Modem
Select Auto if you are using the onboard modem controller
supported by the chipset.
